WE WILL BE SHUT DOWN AND CONDUCTING SHOP MAINTENANCE AND INVENTORY STARTING JULY 6TH-12TH AND WILL RESUME SHIPPING MONDAY THE 13TH. PLEASE EXPECT A DELAY WITH SHIPPING AND HAVE A EXCELLENT INDEPENDENCE DAY!
WE WILL BE SHUT DOWN AND CONDUCTING SHOP MAINTENANCE AND INVENTORY STARTING JULY 6TH-12TH AND WILL RESUME SHIPPING MONDAY THE 13TH. PLEASE EXPECT A DELAY WITH SHIPPING AND HAVE A EXCELLENT INDEPENDENCE DAY!
Featured Products
PMM P320 Gen 2 JTTC and Barrel Combo
$355.00
We will not sell just the comp, The overall length and thread length on our barrels are much shorter and these comps will not install or function on any other barrel.
THIS BARREL AND COMPENSATOR WORK WITH THE COMPACT P320 SLIDE ONLY.You can use any size grip module but the slide will protrude if using a grip module shorter that a full size (but will function fine)
PMM is proud to announce our new line of Compensators and barrels for the P320!
The PMM GEN2 JTTC for the P320 uses a proprietary compact threaded barrel designed specifically for mounting our compensator.
The PMM compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
The PMM GEN2 JTTC of the P320 utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM GEN2 JTTC for the P320 was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb with 115gr UMC! (please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
This Compensator on a compact P320 slide is the length of a full-size P320 and will fit in full-size P320 holsters!
WILL NOT FIT X-CARRY SLIDES
WILL NOT FIT X-CARRY SLIDES
WILL NOT FIT X-CARRY SLIDES
- 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Includes our Proprietary, compensator specific threaded barrel for use on COMPACT slides
- Technology born from our PMM X-Comp pistol.
- The PMM Gen2 JTTC barrel and COMP can also be used on smaller P320 Frames provided the P320 Compact slide is used, Please note the JTTC Compensator may protrude from the frame but will still function 100%
PMM Barrel and Comp packages for Glock 19,17,26
$230.00
We have decided to offer our own in house, PMM branded barrels for the Glock 19 gen 1-5, Glock 17 gen 1-4, Glock 26 gen 3-5. We have worked with Azimuth Technologies who makes many well known, currently available Glock barrels.
These are made to work perfectly with our single port compensators!
Package includes PMM barrel and Single port JTTC for either Gen1-3, Gen 4 or Gen 5
- 416R Stainless Steel
- Pulled broach 1/10 twist rifling
- Threaded ½-28 TPI RH
- Chamber is fully SAAMI Spec
- Precision cut broached rifling
- Hand polished feed ramp
- Refined bore/lapping/rifling and honing processes to ensure greater accuracy
- Made in USA
PMM Glock 19x/45,Gen 5 19 ULTRA JTTC and Barrel
$355.00
THIS BARREL AND COMPENSATOR WORK WITH Glock compact size (19) slide with the Gen 5 nose profile.
PMM is proud to announce our Gen 2 line of Compensators and barrels for the Glock platform!
The PMM GEN2 JTTC for the Glock 19 uses a proprietary compact threaded barrel designed specifically for mounting our compensator.
The PMM compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
The PMM GEN2 JTTC for the Glock 19 utilize a dual port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM GEN2 JTTC for the Glock 19 was designed to work with most factory loaded ammunition and yield 50-55% reduction in muzzle climb with 115gr UMC! (please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
These dual port compensators are the same size as our gen 1 single port and will work in holsters designed to accommodate the original JTTC!
- 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Includes our Proprietary, compensator specific threaded, DLC coated barrel for use on COMPACT (19, 19x,45) GEN 5 slides
- Technology born from our PMM X-Comp pistol.
PMM Glock 19 G3/G4 ULTRA JTTC and Barrel
$355.00
THESE BARREL AND COMPENSATORS WORK WITH Glock compact size (19) slide Gen 3 or Gen 4 (you must choose between the 2)
PMM is proud to announce our Gen 2 line of Compensators and barrels for the Glock platform!
The PMM GEN2 JTTC for the Glock 19 uses a proprietary compact threaded barrel designed specifically for mounting our compensator.
The PMM compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
The PMM GEN2 JTTC for the Glock 19 utilize a dual port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM GEN2 JTTC for the Glock 19 was designed to work with most factory loaded ammunition and yield 50-55% reduction in muzzle climb with 115gr UMC! (please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
These dual port compensators are the same size as our gen 1 single port and will work in holsters designed to accommodate the original JTTC!
- 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Includes our Proprietary, compensator specific threaded barrel in DLC for use on COMPACT (19) Gen 3 OR Gen 4 slides
- Technology born from our PMM X-Comp pistol.
PMM P320 Ultra JTTC and Barrel Combo
$355.00
We will not sell just the comp, The overall length and thread length on our barrels are much shorter and these comps will not install or function on any other barrel.
PLEASE ENSURE YOU CHOOSE THE CORRECT BARREL LENGTH FOR YOUR SLIDE. DUE TO POPULARITY WE CAN NOT GUARANTEE ANY EXCHANGES FOR DIFFERENT BARREL LENGTHS.
SubCompact Slide paired with the JTTC Ultra Compensator results in a flush fit on an X5 frame.
Compact Slide paired with the JTTC Ultra Compensator will protrude slightly from an X5 frame and be the same overall length as an X5 slide.
WILL NOT FIT X-CARRY SLIDES
PMM is proud to announce our new line of Compensators and barrels for the P320!
The PMM JTTC ULTRA for the P320 uses a proprietary compact threaded barrel designed specifically for mounting the PMM JTTC ULTRA Compensator.
All PMM JTTC compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
the PMM JTTC ULTRA for the P320 utilize a dual port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM ULTRA JTTC was designed to work with most factory loaded ammunition and yields and average 50-55% reduction in muzzle climb with 115gr UMC!(please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
This Compensator on a compact slide (as seen in the pictures) is the same length as an X-5 slide.
WILL NOT FIT X-CARRY SLIDES
- 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Includes our Proprietary Barrel, compensator specific threaded barrel.
- Technology born from ourPMM X-Comp pistol.
- The PMM JTTC UTRA barrel and COMP can also be used on smaller P320 Frames provided the P320 Compact slide is used, Please note the JTTC ULTRA Compensator may protrude from the frame but will still function 100%
PMM 509 Ultra (dual port) JTTC and Barrel Combo for the FN509, 509T and 509 Midsize
$355.00
$300.00
We will not sell just the comp, The overall length and thread length on our barrels are much shorter and these comps will not install or function on any other barrel.
THIS BARREL AND COMPENSATOR WORK WITH THE FN509, 509T and 509 Midsize SLIDE ONLY.
***You need to run the yellow recoil spring with this package! If you do not have a tactical you will need to purchase the spring***
The PMM JTTC ULTRA for the FN509, 509T and 509 Midsize uses a factory FN barrel that we custom machine in-house, designed specifically for mounting the PMM JTTC ULTRA Compensator and is finished in a DLC coating.
All PMM JTTC compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
the PMM JTTC ULTRA for the FN509, 509T and 509 Midsize utilize a dual port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM ULTRA JTTC was designed to work with most factory loaded ammunition and yields and average 50-55% reduction in muzzle climb with 115gr UMC!(please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
This compensator is the same physical size as our single port so if you have a holster, you can still use it without modifications.
***REQUIRES YELLOW RECOIL SPRING! AVAILABLE BELOW***
- 7075 Aluminum finished in a type 3 class 2 hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Includes our custom machined, compensator specific threaded barrel for use on 509/509T/509 midsize slides, factory FN barrel
- Barrel is finished in a DLC coating
- Technology born from our PMM X-Comp pistol.
PMM P320 Micro JTTC and Barrel Combo
$355.00
THIS BARREL AND COMPENSATOR WORK WITH THE SUBCOMPACT P320 SLIDE ONLY!
PMM is proud to announce our new line of Compensators and barrels for the P320!
The PMM MICRO JTTC for the P320 uses a proprietary subcompact threaded barrel designed specifically for mounting our compensator. Our compensators mount much like what is found on all modern rifles utilizing a combination of thread locker andproper timing of the compensator in relation to the Pistol slide.
Additionally, the PMM MICRO JTTC of the P320 utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM MICRO JTTC was designed to work with most factory loaded ammunition and yield 25-30% reduction in muzzle climb with 115gr UMC! (please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
- 4141 Stainless Steel then finished in the industry standard PVD or DLC.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Includes our Proprietary, compensator specific threaded barrel, for use on SUBCOMPACT slides only.
- Technology born from ourPMM X-Comp pistol.
Scar 16/17/20/SC Gas Jet Tool
$20.00
The Scar gas jets are notorious for being a stubborn part to remove, they require a specific size flat head screw driver and are often carbon locked into place. We have introduced the solution in a form factor that will allow the removal of a factory gas jet as well as give you the tool to replace it with one of our custom size stainless solutions.
- Perfectly sized flat-head for factory jet removal
- 2.5mm hex head for installation of PMM gas jet
- Wrench flats on either side to aid in the removal of a stuck jet
- Constructed of 4140 Pre-hardened steel for durability
PMM P365 Micro JTTC and Barrel Combo
$355.00
WE CANNOT SELL THE COMP SEPARATELY! IT WILL NOT WORK ON A STANDARD THREADED BARREL!
PLEASE ENSURE YOU CHOOSE THE CORRECT BARREL LENGTH! DUE TO HIGH DEMAND, WE CANNOT GUARANTEE EXCHANGES AND MAY HAVE TO CANCEL YOUR ORDER!
PMM is proud to announce our new Micro Compensator and Barrel Combo for the P365!
The PMM MICRO JTTC for the P365 uses a proprietary threaded barrel designed specifically for mounting our compensator. Our compensator mounts much like what is found on all modern rifles utilizing a combination of thread locker proper timing of the compensator in relation to the P365 slide.
Additionally, the PMM MICRO JTTC of the P365 utilizes a single port design at the 12 O’clock position which maximizes the effectiveness of the compensator. This keeps the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM MICRO JTTC was designed to work with most factory loaded ammunition and yield a 30-40% reduction in muzzle climb with 115gr ammo! (please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, rather it delivers unmatched performance and looks.
- P365 Micro JTTC: 4140 PH Stainless Steel finished in DLC.
- PMM P365 Micro JTTC Barrel: 416R Stainless Steel finish in DLC.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Includes our proprietary, compensator specific threaded barrel.
- Technology born from our PMM X-Comp pistol.
