First Responder/MIL/Veteran Discount

Sale!

BLEM PMM P320 Ultra JTTC and Barrel Combo

$300.00$320.00

Would You Like An Extra Shim Kit?

Yes (No Loctite 272)

PMM JTTC "Muschi" Mounting Block

Select all that apply

yes
Order total:

Earn up to 320 Points.

Product Details

BLEM

 

These are fully functional. They are discounted and marked as BLEM for a variety of cosmetic reasons including tool marks, imperfections in the coating, minor scratches, engraving blemishes, etc.

 

No returns.

 

SIZE GUIDE:

COMPACT 3.9″ Barrel:

  • AXG Scorpion
  • M18
  • Nitron Compact
  • RXP Compact
  • X-Carry
  • X-CARRY SLIDES WITH THE FACTORY ROMEO 1 OPTIC CUT WILL REQUIRE BARREL MODIFICATION SERVICE
  • If you are unsure if this applies to your X-Carry, please follow these guidelines.
    • If your slide is milled for the Romeo 1, then you WILL need the modification.
    • If your slide is milled for the Romeo 1 Pro/Delta Point Pro footprint, you WILL NOT need the modification.
    • Or you will need to measure the Breech Face on your slide. The measurement for the X-Carry is .390″.

 

SUB COMPACT 3.6″ Barrel:

  • XCompact
  • RXP XCompact

 

THESE COMBOS WILL WORK ON ANY SIG SAUER PRO CUT SLIDE.

 

We will not sell just the comp, The overall length and thread length on our barrels are much shorter and these comps will not install or function on any other barrel.

 

PLEASE ENSURE YOU CHOOSE THE CORRECT BARREL LENGTH FOR YOUR SLIDE. DUE TO POPULARITY WE CAN NOT GUARANTEE ANY EXCHANGES FOR DIFFERENT BARREL LENGTHS.

 

SubCompact Slide paired with the JTTC Ultra Compensator results in a flush fit on an X5 frame.

 

Compact Slide paired with the JTTC Ultra Compensator will protrude slightly from an X5 frame and be the same overall length as an X5 slide.

 

The PMM JTTC ULTRA for the P320 uses a proprietary threaded barrel, with PMM logo engraved, designed specifically for mounting the PMM JTTC ULTRA Compensator.

All PMM compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.

The PMM JTTC ULTRA for the P320 utilize a dual port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.

The PMM ULTRA JTTC was designed to work with most factory loaded ammunition and yields and average 50-55% reduction in muzzle climb with 115gr UMC!(please refer to testing charts at the bottom of the product page)

We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.

This Compensator on a compact slide (as seen in the pictures) is the same length as an X-5 slide.

 

9mm Ammo known to work well with our dual port comps.

115gr:

Federal American Eagle

Speer Lawman

Wolf

Remington UMC

Sig Sauer

Fiocchi

 

124gr:

Blazer

Speer Lawman

Federal American Eagle

Sig Sauer

Winchester

PMC

Remington UMC

 

Most 147gr ammo will run but you will see less performance due to a lack of velocity

 

  • 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
  • No set screws, mounts like a muzzle device on a rifle.
  • Captured design ensures that even if your comp comes loose it will not come off or impede function.
  • Includes our Proprietary Barrel, No LCI, PMM Logo Engraved, compensator specific threaded barrel finished in Black DLC.
  • Technology born from our PMM X-Comp pistol.
  • The PMM JTTC UTRA barrel and COMP can also be used on smaller P320 Frames provided the P320 Compact slide is used, Please note the JTTC ULTRA Compensator may protrude from the frame but will still function 100%

 

Note: Threaded pistol barrels are not legal in all areas. It is your responsibility to check your local laws before ordering a threaded barrel.  You also understand and agree that all firearms and firearms related activities are potentially dangerous if handled/conducted improperly and can pose risks and hazards to yourself and others, which may result in property damage, serious injury or death.

PMM Recommendation-

Cascadia Concealment 

T-rex

Tier 1

You will need a G34 length or open ended holster for both options.

Active Retention (Level 2 & 3) Duty Holsters (Namely Safariland):

PMM Recommendation- RDR Gear

You will need a G34 length holster. Additional, the holster plug will likely require modification/removal for proper lockup and function.

 

GLOCK:
G19 w/Single port JTTC or Dual Port JTTC = In between length and a G34 holster is required.
G19 w/Micro comp combo is the exact lengh of a G17 so a G17 holster is required.
G17 w/Single port or Dual Port JTTC = G34 length and a G34 holster is required.
G43/G43x with micro comp is a the length of a G48 so a G48 holster is required.
G48 with micro comp is G17 length.

SIG:
P320 subcompact with ULTRA = Length of full size P320 so F/S P320 holster required.
P320 compact with ULTRA = Right around X5 length so a X5 holster is required.
P320 compact with GEN 2 = Lenght of full size P320 so F/S P320 holster required.
P320 subcompact with MICRO= about 1/4″ longer than a compact P320
P320 compact with Micro you will need a Full Size P320 holster
P365 with Micro comp= P365XL length and a P365XL holster is required.
P365XL with Micro- Comp adds 1/2″ in length.

PMM suggests using high quality holster manufacturers and not ones who skimp on material and care more about marketing.. We have great success with T-Rex Arms and Tier 1 Concealment.
T-Rex Arms also has a “threaded barrel” option on its holster builders and this option will cover our Micro comps perfectly.

 

 

 

 

 

 

 

 

 

Additional information

Weight N/A
Color

Black, FDE

Barrel Length

Subcompact (LCI), Subcompact (Non-LCI)

Only logged in customers can leave a review.

Best Sellers:

Products we support