PMM is proud to announce our new line of pistol compensators.
The PMM Compensator uses a proprietary mounting system much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
Additionally, the PMM compensators utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
During testing the PMM compensators were designed to work with most factory loaded ammunition but will yield the best results with a +P or Nato spec cartridge. We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
1 x Glock Gen 1-3 Compensator
1 x Shim Kit
4 x 0.010″ Shim
2 x 0.005″ Shim
1 x 0.002″ Shim
1 x 0.05mL Vial Loctite 272
*If ordering a 13.5×1 LH Metric compensator, your shim kit will include a PMM Metric Shim Alignment Rod. These are only necessary for metric barrels.*
Sizing & Holster Fitment
Gen 3 19 with Standard JTTC Mounted – Longer than G17, shorter than G34
Gen 3 17 with Standard JTTC Mounted – Same length as G34 & Flush with X300U
Passive Retention (Level 1) Kydex Holsters:
PMM Recommendation- Cascadia Concealment
You will need a G34 length or open ended holster for both options.
Active Retention (Level 2 & 3) Duty Holsters (Namely Safariland):
PMM Recommendation- RDR Gear
You will need a G34 length holster. Additional, the holster plug will likely require modification/removal for proper lockup and function.