Shopping Cart

PMM P320 Ultra JTTC and Barrel Combo

$355.00

Clear

PMM JTTC "Muschi" Mounting Block

Select all that apply

Yes

Would You Like An Extra Shim Kit?

Select all that apply

Yes (No Loctite 272)

Select all that apply

Yes (With Loctite 272)
Product price: $355.00
Total options:
Order total:

Earn up to 355 Points.

Product Details

PLEASE READ FULLY BEFORE ORDERING!

 

 

 

SIZE GUIDE

 

 

 

COMPACT 3.9″ Barrel:

 

 

  • If you are unsure if this applies to your X-Carry, please follow these guidelines.If your slide is milled for the Romeo 1, then you WILL need the modification.
  • If your slide is milled for the Romeo 1 Pro/Delta Point Pro footprint, you WILL NOT need the modification.
  • Or you will need to measure the Breech Face on your slide. The measurement for the X-Carry is .390″.

 

 

SUB COMPACT 3.6″ Barrel:

  • XCompact
  • RXP XCompact

 

 

THESE COMBOS WILL WORK ON ANY SIG SAUER PRO CUT SLIDE.

 

 

We will not sell just the comp, The overall length and thread length on our barrels are much shorter and these comps will not install or function on any other barrel.

 

 

 

PLEASE ENSURE YOU CHOOSE THE CORRECT BARREL LENGTH FOR YOUR SLIDE. DUE TO POPULARITY WE CAN NOT GUARANTEE ANY EXCHANGES FOR DIFFERENT BARREL LENGTHS.

 

 

SubCompact Slide paired with the JTTC Ultra Compensator results in a flush fit on an X5 frame.

 

 

Compact Slide paired with the JTTC Ultra Compensator will protrude slightly from an X5 frame and be the same overall length as an X5 slide.

 

 

WILL NOT FIT X-CARRY SLIDES

 

 

PMM is proud to announce our new line of Compensators and barrels for the P320!

 

 

The PMM JTTC ULTRA for the P320 uses a proprietary compact threaded barrel designed specifically for mounting the PMM JTTC ULTRA Compensator.

 

 

All PMM JTTC compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.

 

 

the PMM JTTC ULTRA for the P320 utilize a dual port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.

 

 

The PMM ULTRA JTTC was designed to work with most factory loaded ammunition and yields and average 50-55% reduction in muzzle climb with 115gr UMC!(please refer to testing charts at the bottom of the product page)

 

 

We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.

 

 

This Compensator on a compact slide (as seen in the pictures) is the same length as an X-5 slide.

WILL NOT FIT X-CARRY SLIDES

 

9mm Ammo known to work well with our dual port comps.

 

115gr:

Federal American Eagle

Speer Lawman

Wolf

Remington UMC

Sig Sauer

Fiocchi

 

124gr:

Blazer

Speer Lawman

Federal American Eagle

Sig Sauer

Winchester

PMC

Remington UMC

 

Most 147gr ammo will run but you will see less performance due to a lack of velocity

 

 

  • 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
  • No set screws, mounts like a muzzle device on a rifle.
  • Captured design ensures that even if your comp comes loose it will not come off or impede function.
  • Includes our Proprietary Barrel, compensator specific threaded barrel finished in Black DLC.
  • Technology born from our PMM X-Comp pistol.
  • The PMM JTTC UTRA barrel and COMP can also be used on smaller P320 Frames provided the P320 Compact slide is used, Please note the JTTC ULTRA Compensator may protrude from the frame but will still function 100%

 

 

 

 

 

 

 

 

 

Additional information

Weight N/A
Color

Black, FDE

Barrel Length

Compact, SubCompact

42 reviews for PMM P320 Ultra JTTC and Barrel Combo

  1. JASON D.

    Absolutely beautiful and amazing! I’m still exploring the limits of this Comp, but so far this is perfect!

  2. Kyle B.

    Built my X5 Legion up with PMM’s dual port compensator for compact slides and the recoil is essentially irrelevant now. Barrel is suuuper accurate. Was hitting 10″x12″ plates at 150 plus yards. Impressive product from these guys. Will either build another p320 with their compensator again or be more than happy to build another pistol with any of their products.

  3. Carlos F.

    PMM P320 Ultra JTTC and Barrel Combo Works and shoots great. I have a Gen1 single comp and the Gen2 comp Kicks up the fun. All who have tried the comp have enjoyed and like the cool look it gives the 320.The most fun you can have with your clothes on.

  4. george y.

    Awesome!!!
    Norsso slide/Dpm recoil spring and guide

    After 100 rounds it liked everything I threw at it. Serious improvement in my shooting ability.

  5. Matthew G.

    PMM makes some quality products. I own 4 of their p320 ultra comps and 1 of their mini comps on my p365 and they are AWESOME comps! They help tremendously with muzzle rise and make for easy follow up shots. Not to mention, they look so good!!! ???????????? Thanks PMM for some awesome products!

Only logged in customers who have purchased this product may leave a review.

Best Sellers:

  • image_20
    From: $153.50 Select options
  • From: $114.75 Select options
  • image_1
    $52.00$57.00 Select options
  • $160.00 Add to cart

Products we support