PMM CZ P10 Compensator
PMM is proud to announce our new line of pistol compensators.
The PMM Compensator uses a proprietary mounting system much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
Additionally, the PMM compensators utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
During testing the PMM compensators were designed to work with most factory loaded ammunition but will yield the best results with a +P or Nato spec cartridge. We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
This will fit both the P10C and P10F. It WILL NOT FIT the P10S.
1 x P10 C/F Compensator
1 x Shim Kit
4 x 0.010" Shim
2 x 0.005" Shim
1 x 0.002" Shim
1 x 0.05mL Vial Loctite 272
*If ordering a 13.5x1 LH Metric compensator, your shim kit will include a PMM Metric Shim Alignment Rod. These are only necessary for metric barrels.*
- 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Designed around the CZ factory threaded barrels (1/2x28) but will work with others that have the same threads. (Gap may vary)
- IF YOU ARE RUNNING THE PRIMARY MACHINE THREADED BARREL, YOU WILL NEED AN ADDITIONAL SHIM KIT TO ENSURE PROPER FITMENT!
- Technology born and improved upon from our PMM X-Comp pistol.