PMM AR15 Oversized Bolt Catch Paddle
Parker Mountain Machine is now offering a Oversized Bolt Catch Paddle for the AR15/M4/416
MIL-SPEC Upper Receivers & MIL-SPEC Bolt Catches only.
Based off of the same design as the PMM BCD, the PMM Oversized Bolt Catch Paddle gives the shooter more surface area on the bolt catch to engage during magazine changes. With 2 options of offsets, you can configure the release to your preference with an offset towards the muzzle and one offset towards the stock.
The forward offset is better suited for right handed shooters and the rear offset is better suited for left hand shooters but either work better than a standard release.
CNC'd in-house out of 6061 aluminum then hardcoated per military standards. The PMM Oversized Bolt Catch is a low cost and effective way of improving the operating functions of your MCX rifle.
1 X Oversized Bolt Catch w/ hardware
1 X 0.02mL Vial Loctite 242
*Supplied Hardware takes T-10 Torx driver. NOT Supplied*
- Finished in a 8625 type 3 class 2 industry standard hardcoat. In colors FDE or black
- Angled surface for positive engagement.
- Limited Lifetime Warranty.
- Installation is simple and is done in minutes.
- No permanent modifications to the rifle.
- Light weight less than .5 oz with Hardware.
- Does not contact any critical components of the AR15 during articulation.