PMM P320 Ultra JTTC and Barrel Combo
PLEASE READ FULLY BEFORE ORDERING!
COMPACT 3.9" Barrel:
- AXG Scorpion
- Nitron Compact
- RXP Compact
- OLDER X-CARRY SLIDES WILL REQUIRE BARREL MODIFICATION SERVICE
If you are unsure if this applies to your X-Carry, please follow these guidelines.
- If your slide is milled for the Romeo 1, then you WILL need the modification.
- If your slide is milled for the Romeo 1 Pro/Delta Point Pro footprint, you WILL NOT need the modification.
- Or you will need to measure the Breech Face on your slide. The measurement for the X-Carry is .390".
SUB COMPACT 3.6" Barrel:
- RXP XCompact
THESE COMBOS WILL WORK ON ANY SIG SAUER PRO CUT SLIDE.
We will not sell just the comp, The overall length and thread length on our barrels are much shorter and these comps will not install or function on any other barrel.
PLEASE ENSURE YOU CHOOSE THE CORRECT BARREL LENGTH FOR YOUR SLIDE. DUE TO POPULARITY WE CAN NOT GUARANTEE ANY EXCHANGES FOR DIFFERENT BARREL LENGTHS.
SubCompact Slide paired with the JTTC Ultra Compensator results in a flush fit on an X5 frame.
Compact Slide paired with the JTTC Ultra Compensator will protrude slightly from an X5 frame and be the same overall length as an X5 slide.
WILL NOT FIT X-CARRY SLIDES
PMM is proud to announce our new line of Compensators and barrels for the P320!
The PMM JTTC ULTRA for the P320 uses a proprietary compact threaded barrel designed specifically for mounting the PMM JTTC ULTRA Compensator.
All PMM JTTC compensators mount much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
the PMM JTTC ULTRA for the P320 utilize a dual port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
The PMM ULTRA JTTC was designed to work with most factory loaded ammunition and yields and average 50-55% reduction in muzzle climb with 115gr UMC!(please refer to testing charts at the bottom of the product page)
We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
This Compensator on a compact slide (as seen in the pictures) is the same length as an X-5 slide.
WILL NOT FIT X-CARRY SLIDES
- 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Includes our Proprietary Barrel, compensator specific threaded barrel.
- Technology born from ourPMM X-Comp pistol.
- The PMM JTTC UTRA barrel and COMP can also be used on smaller P320 Frames provided the P320 Compact slide is used, Please note the JTTC ULTRA Compensator may protrude from the frame but will still function 100%