Beretta M9 JTTC for Factory Threaded Barrel
PMM is proud to announce our new line of pistol compensators.
The PMM Compensator uses a proprietary mounting system much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.
Additionally, the PMM compensators utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.
During testing the PMM compensators were designed to work with most factory loaded ammunition but will yield the best function of the pistolwith a +P or Nato spec cartridge. We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.
IF YOU HAVE A 92A1 WITH A FACTORY THREADED BARREL, PLEASE CONFIRM YOUR THREAD PITCH! BERETTA OFFERED THE 92A1 WITH A M14X1 RH THREAD PATTERN. THIS COMPENSATOR IS 1/2X28 THREADED AND WILL NOT FIT THE M14X1 RH THREAD PATTERN.
1 x Beretta 92 Series Compensator
1 x Shim Kit
4 x 0.010" Shim
2 x 0.005" Shim
1 x 0.002" Shim
1 x 0.05mL Vial Loctite 272
*If ordering a 13.5x1 LH Metric compensator, your shim kit will include a PMM Metric Shim Alignment Rod. These are only necessary for metric barrels.*
- 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
- Designed around the Beretta factory threaded barrel in 1/2x28
- Technology born and improved upon from out PMM X-Comp pistol.