PMM/CQC SCAR 17/20 Barrel Service
Due to popularity, we have added a set amount of inventory for this service to avoid going over capacity. Please read the terms and conditions page about barrel lead times and understand them completely before purchasing this service.
PMM is proud to now offer an affordable SCAR 17/MK20 SBR/Pin And Weld barrel option.
PMM Will take your disassembled SCAR 17/MK20 barrel and Precisely Cut it. PMM then Crowns it and finally threads the existing barrel in your SCAR 17/MK20 rifle.
Re-assembly of the barrel starts with the insertion
of one of two supplied PMM Stainless Steel Gas port Screws
Finally the PMM barrel is re-assembly then shipped back to you for assembly.
If you want us to laser engrave your upper per NFA regulations, you will receive a 50% discount for our laser engraving service. Simply add the laser engraving service to your cart ($40) and provide your trust information to us during checkout.
Product Features:
- Appropriate size Gas jet is installed in barrel by PMM at the time of service this will vary in size depending upon the length of barrel you choose. Additionally I provide multiple back up Gas jet sizes.
- Barrel threading is concentric with the bore of the barrel.
- gas system gets cleaned at time of barrel service
- Barrel gets sized to 13" from breech to muzzle including threads. (Custom Lengths such as the 11.5 or 12"can be done However PMM Recommends the 13" as the Standard.)
- PMM Highly Recommends the USE of the SUREFIRE SCAR Shoulder ring on ALL SCAR 17/MK20 Barrel's, PMM Will not be held responsible for Baffle strikes on any PMM CQC barrel jobs Not using this ring to insure Proper Muzzle device Alignment.
- All return shipments will be fully insured and that is included in the price.
Date:5/22/2016
Time 2:12pm
Temp: 56*F
Ammo: Freedom Munitions RPT
150 Grain Remanufactured .762x51/.308
Testing was conducted using a Pro-Chrono Chronograph Tester as Follows:
Non Suppressed : Suppressed:
(Gemtech ONE)
Shot-1 =2515FPS Shot-1 =2544 FPS
Shot-2=2539 FPS Shot-2=2559 FPS
Shot-3=2544 FPS Shot-3=2559 FPS
Shot-4=2530FPS Shot-4=2525 FPS
Shot-5=2544 FPS Shot-5=2554 FPS
Avg. Velocity = 2534.4 Avg. Velocity = 2548.2
|
The Rifle Featured to the Right is a PMM SCAR 17 With a PMM 12" CQC Barrel and Factory 16" Barrel was tested @ 100 Yards.
PMM 12" CQC Barrel Date:5/22/2016 Time 2:12pm Temp: 56*F Ammo: Freedom Munitions RPT 150 Grain Remanufactured .762x51/.308 Testing was conducted using a Pro-Chrono Chronograph Tester as Follows: Non suppressed: Suppressed (Dagger) Shot -1 = 2496 Shot -1 = 2496 Shot -1 = 2478 Shot -1 = 2452 Shot -1 = 2482 Shot -1 = 2469 Shot -1 = 2450 Shot -1 = 2496 Shot -1 = 2473 Shot -1 = 2453 Avg. Velocity = 2475.8 Avg. Velocity = 2473.2 FNH 16" Barrel Date:5/22/2016 Time 2:25pm Temp: 66*F Ammo: Freedom Munitions RPT 150 Grain Remanufactured .762x51/.308 Testing was conducted using a Pro-Chrono Chronograph Tester as Follows: Non suppressed: Suppressed (Dagger) Shot -1=2656 Shot -1=2677 Shot -1=2682 Shot -1=2672 Shot -1=2661 Shot -1=2693 Shot -1=2672 Shot -1=2688 Shot -1=2677 Shot -1=2666 Avg. Velocity = 2669.6 Avg. Velocity =2679.2 |
|