PMM Compensator for Beretta M9

Includes:

1 x PMM Beretta 90 Series 9mm Compensator

• 7075 Aluminum finished in a type III class 2 Black or FDE hardcoat anodize
• No set screws, mounts like a muzzle device on a rifle.
• Captured design ensures that even if your comp comes loose it will not come off or impede function.
• Designed around the Beretta factory threaded barrel in 1/2 x 28

1 x Shim Kit

• 4 x 0.010″ Shim
• 2 x 0.005″ Shim
• 1 x 0.002″ Shim
• 1 x 0.05mL Vial Loctite 272

Optional Muschi Mounting Block

Please note, you will need to order an additional shim kit for pre M9A3 centurion length slides

The PMM Compensator uses a proprietary mounting system much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the pistol slide.

PMM compensators utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the comp in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.

During testing the PMM compensators were designed to work with most factory loaded ammunition but will yield the best function of the pistol with a +P or Nato spec cartridge. We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, rather it delivers unmatched performance and looks.

IF YOU HAVE A 92A1 WITH A FACTORY THREADED BARREL, PLEASE CONFIRM YOUR THREAD PITCH! BERETTA OFFERED THE 92A1 WITH A M14X1 RH THREAD PATTERN. THIS COMPENSATOR IS 1/2X28 THREADED AND WILL NOT FIT THE M14X1 RH THREAD PATTERN.

FDE Disclaimer: “FDE” is used throughout our product offerings to reference a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Therefore, your “FDE” product may vary from other parts from PMM and other companies, and may vary from the photos shown online.

Compatible M9 Models:

• M9
• M9A1
• M9A3
• M9A4
• 92X
• 92XI SAO
• 92X GTS
• If your model is not listed or if you’re unsure which comp to order, please email customerservice@parkermountainmachine.com

Ammo Recommendations:

115gr:

Federal American Eagle

Speer Lawman

Wolf

Remington UMC

Sig Sauer

Fiocchi

Magtech

124gr:

Blazer

Speer Lawman

Federal American Eagle

Sig Sauer

Winchester

PMC

Remington UMC

147gr:

Most ammo will run, but you will see less performance due to a lack of velocity

Ammo to stay away from:

Blazer 115

Winchester White Box 115

Armscor 115

PMC 115

All reloads or reman ammo