PMM Barrel and Compensator Combos for Glock
$230.00 – $360.00
Product Details
Size Guide:
Glock 26 Gen 5 combos will fit all gen Glock 26s
Glock 19 Gen 5 combos will also fit the 19x and 45
Glock 17 Gen 5 combos will also fit the 47 and 49
These comps are designed to fit factory slides. If you are purchasing this for an aftermarket slide, please contact customerservice@parkermountainmachine.com to confirm which gen comp you will need.
Includes:
1x PMM Compensator for Glock
- Micro Comp: 4140 Stainless Steel finished in the industry standard FDE PVD or Black DLC
- Duty & Ultra Comp: 7075 Aluminum finished in type III class 2 hardcoat anodize in black or FDE
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function.
1x PMM Threaded Barrel
- 416R Stainless Steel finished in DLC
1 x Shim Kit
- 4 x 0.010″ Shim
- 2 x 0.005″ Shim
- 1 x 0.002″ Shim
- 1 x 0.05mL Vial Loctite 272
Optional Muschi Mounting Block
Note: Threaded pistol barrels are not legal in all areas. It is your responsibility to check your local laws before ordering a threaded barrel. You also understand and agree that all firearms and firearms related activities are potentially dangerous if handled/conducted improperly and can pose risks and hazards to yourself and others, which may result in property damage, serious injury or death.
ULTRA & DUTY INTSALL
MICRO INSTALL
Recoil Reduction:
All of our compensators are tested in a ransom rest and measured with a digital inclinometer.
The PMM MICRO for the Glock was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
The PMM DUTY for the Glock was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
The PMM ULTRA for the Glock was designed to work with most factory loaded ammunition and yields and average 40-45% reduction in muzzle climb (with 115gr UMC)
PMM Holster Recommendation:
Active Retention (Level 2 & 3) Duty Holsters (Namely Safariland):
PMM Recommendation- RDR Gear
G19/ G45 w/ duty or dual port comp = In between 17 & 34 length so a G34 holster is required
G17 w/ duty or dual port comp = G34 length
G19/ G45 w/ micro comp= G17 length
G17 w/ micro comp= In between 17 & 34 length so a G34 holster is required
Ammo Recommendations:
115gr:
Federal American Eagle
Speer Lawman
Wolf
Remington UMC
Fiocchi
Magtech
124gr:
Blazer
Speer Lawman
Federal American Eagle
Winchester
PMC
Remington UMC
147gr:
Most ammo will run, but you will see less performance due to a lack of velocity
Ammo to stay away from:
Blazer 115
Winchester White Box 115
Armscor 115
PMC 115
All reloads or reman ammo
PSA:
Micro comps and ultra comps cannot be purchased for use with other threaded barrels. The comp and barrel are proprietary to one another. Likewise, PMM proprietary barrels are only for use with the proprietary comp, and cannot be used with suppressors or other muzzle devices.
PMM Disclaimer:
PMM reserves the right to make esthetical design changes. While we try to accurately represent our current product offerings’ designs, there may be some esthetical variation from the product posted on this page and the product you receive.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that this
product is compatible with GLOCK pistols.
DISCLAIMER: “GLOCK” is a federally registered trademark of
GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and
GLOCK Ges.m.b.H. Neither Parker Mountain Machine & Armory nor
this site are affiliated in any manner with, or otherwise endorsed by,
GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page
is merely to advertise the sale of GLOCK pistols, parts, or components.
For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products
and parts visit www.glock.com.
Additional information
| Slide Length | Glock 19, Glock 17, Glock 26 |
|---|---|
| Generation | Gen 5, Gen 4, Gen 3 |
| Compensator | Ultra, Micro, Duty |
| Finish | Black Anodize, FDE Anodize, Black DLC, FDE PVD |
10 reviews for PMM Barrel and Compensator Combos for Glock
Best Sellers:
-
$8.00 Select options This product has multiple variants. The options may be chosen on the product page -
$360.00 Select options This product has multiple variants. The options may be chosen on the product page -
$100.00 Select options This product has multiple variants. The options may be chosen on the product page -
$10.00 – $12.00 Select options This product has multiple variants. The options may be chosen on the product page
Products we support
Matt Helm (verified owner) –
This Gen 3 G19 Micro Comp is probably my 5th or 6th Parker Mountain Machine comp order. Beautifully matched to the guns, simple but secure mounting, reliable operation and extremely effective in moderating muzzle rise. Huge fan of PMM.
Eric Pratt (verified owner) –
Was on the email list to be notified when the 26 micro comp was back in stock. Just like my other PMM comps, it did not disappoint. Perfect fit and finish. Zero failures with 3 different types of ammo. Never lose the dot while firing now even with the flush 10 rnd mag in the Glock 26.
Alex Kim –
Got the Ultra Comp for my 19x MOS – FDE looks great and the fitment is perfect on it.
Firstly, this thing rips. I wish I could add a picture or video to this review because it’s ridiculously flat and watching the gas shoot out of the comp is awesome.
Functionally, barrel seems great and as mentioned, the comp works like a dream, I’d also note that, the comp itself is really light weight, kind of nice since it’s still very pointable, especially compared to the comp I have on my M&P 2.0 by another brand.
I will note that, like another review mentioned, install was complex, not difficult but required some tuning with the shims – would 100% recommend the extra shim kits and Muschi block, they helped a lot.
Other than that, I was having issues with running 115s, they wouldn’t really cycle on the stock recoil spring, probably around 1-1.5k rounds on it (also have SRO and CHP Steel Plate plus Suppressor Height Steel Irons – extra weight may be contributing.)
I just got an adjustable reduced recoil spring from NDZ performance in, running 15lb from the 18lb factory – haven’t gotten it out to the range yet but looking forward to seeing if it helps.
All of that is to say that this is the best comp I’ve run on a pistol, very reasonable price, and a 10/10 for a crazy flat Glock just may require some tuning and adjustment for different setups.
Russ –
Install of the Micro Comp was easy on my Glock 19. I just followed the YouTube video and used the install block. I only needed one shim to time it. Note the difference in timing & torque between the comps.
Shoots super flat now with little recoil (I do use a ZRTS uncaptured guide rod and 15lb spring). I had zero issues with ammo and the comp did not move after a few hundred rounds ( I put a small witness mark under the comp), I like shooting this 98% as much as my Staccato XC.
Great product.
Now they need to make a mag release for the Glock 43X/48.
Walter D. (verified owner) –
The Micro comp is 5 stars every day of the week. I have ran every type of ammunition available through it without a single problem. 100+ rounds each of Blazer 115 and 124, Federal HST’s 125 and 147, Magtech 115, and even the good gun killer Turkish reman BS, and it didn’t flinch once. Install took no more than 5 minutes and the fit is excellent. Packaging was super solid, but not over done like some other companies. The 30-35% recoil reduction they claim has to be on the low side of the scale. It is a laser pointer. Running bill drills at 50 feet I experienced on average a 1 inch group. I could not be happier with the actual comp. My one and only complaint is that the Muschi block and comp didn’t fit together enough to torque the barrel down. I assume they were both on the higher end of their tolerances, but it was a little annoying to have to just switch to the soft jaws on my vice. $10 down the drain is no where near a deal breaker and should not push anyone away from the PMM comps at all. All in all 10/10 experience and PMM has made a customer for life out of me.