PMM Compensator for CZ P10

Includes:

1 x P10 C/F Compensator

• 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
• No set screws, mounts like a muzzle device on a rifle.
• Adds approximately 1.2″ to overall length.

1 x Shim Kit:

• 4 x 0.010″ Shims
  2 x 0.005″ Shims
  1 x 0.002″ Shim
  1 x 0.05mL Vial Loctite 272

(Optional Muschi Mounting Block)

Compatibility:

• This will fit both the P10C and P10F. It WILL NOT FIT the P10S.
• Designed around the CZ factory threaded barrels (1/2×28) but will work with others that have the same threads. (Gap may vary)
• True Precision barrels will function but have about a .100″ gap from slide to comp.
• Primary Machine threaded barrels will require and additional shim kit.
• Czech Market CZ barrels noted at 122mm length will not work.

PMM compensators use a proprietary mounting system much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the pistol slide.

Additionally, PMM compensator utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the comp in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.

During testing the PMM compensators were designed to work with most factory loaded ammunition but will yield the best results with a +P or Nato spec cartridge. We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, rather it delivers unmatched performance and looks.