PMM Baseplates for Walther PDP
Price range: $25.00 through $45.00
Product Details
PMM +4 Extended Magazine Baseplate for Walther PDP Full Sized/ 18 Round Mags Features:
- Spring loaded gate allows for simple installation
- Designed for factory length springs. You must remove the floor plate
- Fits factory full sized 18rd 9mm magazine
- Compatible with the PDP PRO magwell, or may be used without a magwell
- Machined in house out of quality 7075 aluminum
- Finished in type 3 class 2 industry standard hardcoat black anodize
- Made in the USA
Included:
- 1 PMM Extended Magazine Baseplate for Walther PDP 18 round mags (per quantity ordered)
Optional Extended Power Mag Spring:
- We have received reports from a few customers of underpowered factory springs. You are able to stretch your spring if you are having lock-back issues, or we are offering extended power springs for an additional cost.
Compatible with the PDP PRO magwell. Baseplates may be used without a magwell*.
*In our testing, we have seen in the SF PDPs without a magwell that over insertion may occur with continued pressure on the mag.
Disclaimer:
Per our terms of service, you are responsible for knowing and following all applicable Federal, State, and Local laws and regulations. If you are unsure of your local and state laws and regulations, please call your local law enforcement prior to ordering.
Not for sale to California or Washington residents.
PMM Magazine Baseplate for Walther PDP Features:
- Simple installation
- Weighs 16 grams
- Machined in house out of quality 6061 aluminum
- Finished in type 3 class 2 industry standard hardcoat black anodize
- Made in the USA
Included:
- 1 PMM +0 Magazine Baseplate for Walther PDP (per quantity ordered) (Compact=15 rd, full size=18 rd)
Not Compatible:
- PDP F-Series
DISCLAIMER: You are responsible for knowing and following Federal, State, and local laws.
Additional information
| Magazine Capacity | 18 round, 15 round |
|---|---|
| Product | Magwell, Baseplate, +3 Extended Baseplate, +4 Extended Baseplate, BLEM +4 Extended Baseplate |
13 reviews for PMM Baseplates for Walther PDP
Best Sellers:
-
$8.00 This product has multiple variants. The options may be chosen on the product page -
Original price was: $360.00.$300.00Current price is: $300.00. This product has multiple variants. The options may be chosen on the product page
-
Price range: $10.00 through $12.00 This product has multiple variants. The options may be chosen on the product page -
$100.00 This product has multiple variants. The options may be chosen on the product page
Products we support
W.Shephard (verified owner) –
Love my basepads for my pdp compact!
stephen (verified owner) –
Very nice quality and finish, super easy install and is designed like oem baseplates- not screws on the back or bottom
Ronnie Reyes (verified owner) –
Received the +4 mag extension base plates for my full size 5″ PDP. Love the construction and the fact that they are for the most part semi-toolless to install and remove. That was the main purpose for ordering. As far as function, I could only load to 21, even with OEM springs so they are effectively a +3 extension, and I did not get lock-back on last round. I replaced the OEM springs with 170mm (13 coil) springs, and now get lock-back consistently. The extensions were touted to work with all magwells, but do not seat immediately with my Floyd’s Custom magwell that my gun came with, without a pretty good “tap” to seat. The only concern is; it is enough of a “tap” that I’m worried I may damage my extractor if I over “tap” to seat. I love the design, pretty, sleek and well done, but would have loved a bit more heft (personal preference). I do think, a LONG range day and I may re-think that, but just holding it static shooting is great. Overall, 4/5 and looks awesome in conjunction with the single-port comp on it.
Rayhan Shaikat (verified owner) –
After having Henning base pad extensions. This one is my 2nd option over everything else. How easy they are to put on and take off is S Tier. They don’t lock back now that I’ve had them for quite some time(which is nbd for me) But I’m sure some extra power springs could solve that. Reliability in them is outstanding as well. FDE inbound perhaps ??
Marcos Garcia –
Great machine work. Feels really solid. However, did have failure to feed several times using the stock spring since one is not provided. Failure to feed is a no go for me. Will have to buy a sperate spring to try and salvage the $50 I already spent