PMM Micro Barrel and Compensator Combo for Glock 43/43x/48 With Muschi
$360.00
Product Details
Size Guide:
These comps are designed to fit factory slides. If you are purchasing this for an aftermarket slide, please contact customerservice@parkermountainmachine.com to confirm which gen comp you will need.
Includes:
1x PMM Compensator for Glock Slimline
- Stainless Steel coated in Black Diamond Like Coating (DLC)
1x PMM Threaded Barrel
- Material: 416 Stainless Steel heat treated to 38-42 HRC
- Rifling: Standard
- Twist: 1/10
- Caliber: 9mm
- Coating: Black Diamond Like Coating (DLC)
1x Shim Kit
- 4 x 0.010″ Shim
- 2 x 0.005″ Shim
- 1 x 0.002″ Shim
- 1 x 0.05mL Vial Loctite 272
- 1 Alignment Rod
1x Muschi Mounting Block
Note: Threaded pistol barrels are not legal in all areas. It is your responsibility to check your local laws before ordering a threaded barrel. You also understand and agree that all firearms and firearms related activities are potentially dangerous if handled/conducted improperly and can pose risks and hazards to yourself and others, which may result in property damage, serious injury or death.
PMM Install Video
PSA:
We have seen issues with Shield arms mags. If you are having issues running these mags we have been told leaving the mags loaded for a few weeks and keeping the mag spring under tension helps clear up the issue.
Recoil Reduction:
All of our compensators are tested in a ransom rest and measured with a digital inclinometer.
The PMM MICRO for the Glock slimline was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
PMM Holster Recommendation:
PMM Recommendation-
Active Retention (Level 2 & 3) Duty Holsters (Namely Safariland):
PMM Recommendation- RDR Gear
GLOCK:
G43/G43x with micro comp is a the length of a G48 so a G48 holster is required.
G48 with micro comp is G17 length.
PMM suggests using high quality holster manufacturers and not ones who skimp on material and care more about marketing.. We have great success with T-Rex Arms and Tier 1 Concealment.
T-Rex Arms also has a “threaded barrel” option on its holster builders and this option will cover our Micro comps perfectly.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that this
product is compatible with GLOCK pistols.
DISCLAIMER: “GLOCK” is a federally registered trademark of
GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and
GLOCK Ges.m.b.H. Neither Parker Mountain Machine & Armory nor
this site are affiliated in any manner with, or otherwise endorsed by,
GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page
is merely to advertise the sale of GLOCK pistols, parts, or components.
For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products
and parts visit www.glock.com.
Additional information
| Glock Slimline Micro JTTC (Platform) | Glock 43, Glock 43X, Glock 48 |
|---|
39 reviews for PMM Micro Barrel and Compensator Combo for Glock 43/43x/48 With Muschi
Best Sellers:
-
$8.00 Select options This product has multiple variants. The options may be chosen on the product page -
$360.00 Select options This product has multiple variants. The options may be chosen on the product page -
$100.00 Select options This product has multiple variants. The options may be chosen on the product page -
$10.00 – $12.00 Select options This product has multiple variants. The options may be chosen on the product page
Products we support
bomberochichi (verified owner) –
All I can say is that this product is AWESOME! This comp tames the 43x MOS recoil completely and makes the shooting experience that much better! I’d recommend this comp to anyone that is thinking about purchasing one, JUST DO IT. Worth every penny.
William Liang (verified owner) –
Superb machining. Unmatched aesthetics. Good performance and absolute reliability with stock recoil spring assembly as well as DPM recoil spring assembly (with medium spring).
Runs 115gr range ammo, 115gr FTX, 147gr HST all perfectly.
On a G48. Only con was that the included “muschi” didn’t seem to fit? Just threw it in my vice and installed it anyway, no marring.
Frank Vigil (verified owner) –
I finally pulled the trigger (pun intended) after a lot of consideration. The price definitely held me back for a while, but after finally making the decision, I’m happy I did. The barrel is noticeably more accurate than the factory barrel and recoil with 115 grain ammo is non existent. I wish I would have recorded it but I was able to consistently pull off “keyholed” double taps at about 4 yards. With 124 grain HST +P the comp took away all the snap and made it feel like standard 115. I will be buying other comps for different pistols. Fit and finish are also very good.
Adam Angel Rodriguez (verified owner) –
First and foremost, the look as it sits in perfect position with my 43x slide is untouchable. It makes my Bashido look even tougher. My first shots were incredibly flatter as this combination made all the difference in this snappy pistol. I was fine without it until I shot with it. If anyone says there is no difference, they are wrong and most likely terrible shooters that make excuses about what they have in hand. You guys have created a piece of history and I can’t wait to see what you do next.
Jason Powell (verified owner) –
PMM was fantastic, purchased my G48 barrel/comp a month before it arrived from another custom shop doing slide work, they turned it around in 1 business day, super duper flush comp install. Flattest chooting G48 out there!