PMM Barrel and Compensator Combos for Glock

Size Guide:

Glock 19 Gen 5 combos will also fit the 19x and 45

Glock 17 Gen 5 combos will also fit the 47 and 49

 

These comps are designed to fit factory slides. If you are purchasing this for an aftermarket slide, please contact customerservice@parkermountainmachine.com to confirm which gen comp you will need.

 

Includes:

1x PMM Compensator for Glock

• Micro Comp: 4140 PH Stainless Steel finished in the industry standard FDE PVD or Black DLC
• Duty & Ultra Comp: 7075 Aluminum finished in type III class 2 hardcoat anodize in black or FDE
• No set screws, mounts like a muzzle device on a rifle.
• Captured design ensures that even if your comp comes loose it will not come off or impede function.

1x PMM Threaded Barrel

• 416R Stainless Steel finished in DLC

1 x Shim Kit

• 4 x 0.010″ Shim
• 2 x 0.005″ Shim
• 1 x 0.002″ Shim
• 1 x 0.05mL Vial Loctite 272

Optional Muschi Mounting Block

 

Note: Threaded pistol barrels are not legal in all areas. It is your responsibility to check your local laws before ordering a threaded barrel.  You also understand and agree that all firearms and firearms related activities are potentially dangerous if handled/conducted improperly and can pose risks and hazards to yourself and others, which may result in property damage, serious injury or death.

Recoil Reduction:

All of our compensators are tested in a ransom rest and measured with a digital inclinometer.

The PMM MICRO for the Glock was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)

The PMM DUTY for the Glock  was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)

The PMM ULTRA for the Glock was designed to work with most factory loaded ammunition and yields and average 40-45% reduction in muzzle climb (with 115gr UMC)

 

PMM Holster Recommendation:

Cascadia Concealment 

T-rex

Tier 1

Active Retention (Level 2 & 3) Duty Holsters (Namely Safariland):

PMM Recommendation- RDR Gear

 

G19/ G45 w/ duty or dual port comp = In between 17 & 34 length so a G34 holster is required
G17 w/ duty or dual port comp = G34 length

G19/ G45 w/ micro comp= G17 length

G17 w/ micro comp= In between 17 & 34 length so a G34 holster is required

 

Ammo Recommendations:

115gr:

Federal American Eagle

Speer Lawman

Wolf

Remington UMC

Fiocchi

Magtech

124gr:

Blazer

Speer Lawman

Federal American Eagle

Winchester

PMC

Remington UMC

147gr:

Most ammo will run, but you will see less performance due to a lack of velocity

 

Ammo to stay away from:

Blazer 115

Winchester White Box 115

Armscor 115

PMC 115

All reloads or reman ammo

 

PSA:

Micro comps and ultra comps cannot be purchased for use with other threaded barrels. The comp and barrel are proprietary to one another. Likewise, PMM proprietary barrels are only for use with the proprietary comp, and cannot be used with suppressors or other muzzle devices.

 

 

 

PMM Disclaimer:

PMM reserves the right to make esthetical design changes. While we try to accurately represent our current product offerings’ designs, there may be some esthetical variation from the product posted on this page and the product you receive.

 

DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that this
product is compatible with GLOCK pistols.

DISCLAIMER: “GLOCK” is a federally registered trademark of
GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and
GLOCK Ges.m.b.H. Neither Parker Mountain Machine & Armory nor
this site are affiliated in any manner with, or otherwise endorsed by,
GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page
is merely to advertise the sale of GLOCK pistols, parts, or components.
For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products
and parts visit www.glock.com.