PMM Duty Compensator for PSA Dagger
$75.00
Product Details
Included:
1x PMM Dagger Compensator
- 7075 Aluminum finished in a type 3 class 2 Black or FDE hardcoat anodize
- 1/2 x 28 thread pitch designed around the PSA Dagger threaded barrel (9×19 marking on side of barrel, see below)
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function
1 x Shim Kit:
- 4 x 0.010″ Shim
- 2 x 0.005″ Shim
- 1 x 0.002″ Shim
- 1 x 0.05mL Vial Loctite 272
Optional Muschi Mounting Block
Barrel Fitment:
There were several variants of barrels sold with the PSA Dagger. These comps are designed around the current 4.5″ threaded barrel offering by PSA. The engraving should be on the ejection port side, showing 9×19.
We cannot guarantee fitment on barrels that are marked differently.
Non Compatible:
- Carry Cut (not Extreme, OG Carry Cut slides)
- SWR Slides
- Micro Dagger
- Sabre
Recoil Reduction:
All of our compensators are tested in a ransom rest and measured with a digital inclinometer.
The PMM comp for the Dagger was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
Ammo Recommendations:
115gr:
Federal American Eagle
Speer Lawman
Wolf
Remington UMC
Sig Sauer
Fiocchi
Magtech
124gr:
Blazer
Speer Lawman
Federal American Eagle
Sig Sauer
Winchester
PMC
Remington UMC
147gr:
Most ammo will run, but you will see less performance due to a lack of velocity
Ammo to stay away from:
Blazer 115
Winchester White Box 115
Armscor 115
PMC 115
All reloads or reman ammo
PMM Disclaimer:
PMM reserves the right to make esthetical design changes. While we try to accurately represent our current product offerings’ designs, there may be some esthetical variation from the product posted on this page and the product you receive.
Barrel and slide not included in this product. These photos are only shown for fitment.
Additional information
| Finish | Black, FDE |
|---|
11 reviews for PMM Duty Compensator for PSA Dagger
Best Sellers:
-
$8.00 Select options This product has multiple variants. The options may be chosen on the product page -
$360.00 Select options This product has multiple variants. The options may be chosen on the product page -
$100.00 Select options This product has multiple variants. The options may be chosen on the product page -
$10.00 – $12.00 Select options This product has multiple variants. The options may be chosen on the product page
Products we support
Tyler (verified owner) –
Product is well made and fitment is great (if you have the right slide) this did not fit the SWR slide as I found out and that this is my only reason for giving 4 stars instead of 5. I instead got a SW2 slide and fitment was perfect. Almost no gaps to be seen between the comp and the slide. There is a very noticable reduction in muzzel flip now. This makes follow up shots much quicker!
Ashaley Bland (verified owner) –
Excellent comp. Fit and finish was great. It took me only three combinations of shims to get it right. I racked the slide numerous times and not one mark was left on the end of my slide. The grooved cuts into it match the dagger perfectly. I am in love. Will be buying another for my other one. As far as performance I have no issues with remington and winchester ammo. I will test some budget ammo soon. But you should know that sometimes you need to go lighter or heavier on the recoil spring depending on your setup. Same as a buffer for an AR. My slide is also a newer one with the half moon cut on the barrel end. I did not like that at all. Didn’t think it was a big deal when I bought it. So this comp covered that ugliness right up. Thanks again.
David Boeck Jr (verified owner) –
The PMM comp is a quality addition to your weapon of choice. The fit and finish are superb and ease of installation was phenomenal. It was fully installed, up and gunning in under 10 minutes with zero issues at 500 rounds. I will be adding these compensators to every weapon I can. Keep up the Great work!
Alex Elliott (verified owner) –
This is the second comp I’ve installed on a Dagger ECC slide, the first being a blem/closeout model that didn’t fit very well (but the listing did warn of that at the time). This most recent one however fit very well and wasn’t anymore difficult to install than the PMM Glock compensators I’ve done. While you’re in there replacing every other part inside your Dagger to make it some semblance of reliable, you may as well grab one of these comps too. It just makes sense.
Chase (verified owner) –
Noticeable recoil reduction Looks great, it fit my dagger without the annoying gap that som daggers have.