PMM Duty Compensator for PSA Dagger
$75.00
Product Details
Included:
1x PMM Dagger Compensator
- 7075 Aluminum finished in a type 3 class 2 Black or FDE hardcoat anodize
- 1/2 x 28 thread pitch designed around the PSA Dagger threaded barrel (9×19 marking on side of barrel, see below)
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function
1 x Shim Kit:
- 4 x 0.010″ Shim
- 2 x 0.005″ Shim
- 1 x 0.002″ Shim
- 1 x 0.05mL Vial Loctite 272
Optional Muschi Mounting Block
Barrel Fitment:
There were several variants of barrels sold with the PSA Dagger. These comps are designed around the current 4.5″ threaded barrel offering by PSA. The engraving should be on the ejection port side, showing 9×19.
We cannot guarantee fitment on barrels that are marked differently.
Compatible:
- Extreme Carry Cut (ECC)
- SW1
- SW2
- SW3
- SW4
- SW6
Non Compatible:
- SW5
- SWR
- SWR2
- C1 Compensated Slides
- Micro Dagger
- Sabre
- Etc
Recoil Reduction:
All of our compensators are tested in a ransom rest and measured with a digital inclinometer.
The PMM comp for the Dagger was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
Ammo Recommendations:
115gr:
Federal American Eagle
Speer Lawman
Wolf
Remington UMC
Sig Sauer
Fiocchi
Magtech
124gr:
Blazer
Speer Lawman
Federal American Eagle
Sig Sauer
Winchester
PMC
Remington UMC
147gr:
Most ammo will run, but you will see less performance due to a lack of velocity
Ammo to stay away from:
Blazer 115
Winchester White Box 115
Armscor 115
PMC 115
All reloads or reman ammo
PMM Disclaimer:
PMM reserves the right to make esthetical design changes. While we try to accurately represent our current product offerings’ designs, there may be some esthetical variation from the product posted on this page and the product you receive.
Barrel and slide not included in this product. These photos are only shown for fitment.
Additional information
| Finish | Black, FDE |
|---|---|
| Compatible Models |
14 reviews for PMM Duty Compensator for PSA Dagger
Best Sellers:
-
$8.00 This product has multiple variants. The options may be chosen on the product page -
Original price was: $360.00.$300.00Current price is: $300.00. This product has multiple variants. The options may be chosen on the product page
-
Price range: $10.00 through $12.00 This product has multiple variants. The options may be chosen on the product page -
$100.00 This product has multiple variants. The options may be chosen on the product page
Products we support
Galo (verified owner) –
I love this comp. I recommend it.
Mark (verified owner) –
I’m thoroughly impressed!
The design looks fantastic, and the fit and finish are top-notch. Most importantly, it noticeably reduces muzzle flip, improving overall control and shooting comfort.
Definitely a worthwhile investment!
John (verified owner) –
5/7/26 I needed to reach out to customer service on my order. I order directly from manufacturers as often as I can, so far it was the fastest support I have received from anyone in the industry, great job.
Harmon Eugene Greer (verified owner) –
It looks good. It wasnt hard to install. Its been 100% reliable with the factory spring and a 15 lbs spring. Ive shot 9mm nato ball. 115 steel case magtech and some handloaded 130 power factor match ammo. 4/5 stars because i wanted a little more comp. An extra baffle wouldnt likely hurt reliability and would very likely make the recoil impulse a little flatter.. i know its not a competition compensator but i would buy one if offered.. (no i am not trying to shoot major 9mm ammo, i just wanted softer shooting psa dagger for open div 3 gun pistol. Its minor power only.