PMM Sig Sauer P320 Gen 1 Duty Comp for Threaded Barrels

$100.00

Would You Like An Extra Shim Kit?

PMM JTTC "Muschi" Mounting Block

Order total:

Earn up to 100 Points.

Product Details

Comps for the p320 threaded barrel you have

 

13.5×1 LH Metric Threaded

  • Sig Sauer Factory Threaded 13.5×1 LH Metric Threaded Barrel

 

Faxon “C” Marked 1/2×28 Threaded

  • Faxon Compact Barrel
  • Faxon shoulder depth: .475″

 

SilencerCo “F” Marked 1/2×28 Threaded

  • Full Size SilencerCo 1/2×28 Threaded Barrel
  • Griffin Armament 1/2×28 Threaded Barrel (You’ll need extra shims)
  • True Precision barrels
  • SilencerCo shoulder depth: .375″

 

Sig X-Carry Legion “△” Marked 1/2×28 Threaded

  • Sig Sauer Factory Threaded 1/2 x 28  Threaded X-Carry Legion Barrel
  • ** Will not work on ANY other barrel than the Sig Brand Compact Length threaded barrel **

 

The PMM Compensator uses a proprietary mounting system much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the Pistol slide.

Additionally, the PMM compensators utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the compensator in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.

During testing the PMM compensators were designed to work with most factory loaded ammunition but will yield the best results with a +P or Nato spec cartridge. We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, Rather it Delivers unmatched performance and looks.

 

Included:

1 x P320 Gen 1 Compensator

  • 7075 Aluminum finished in a type 3 class 2 Black of FDE hardcoat anodize.
  • No set screws, mounts like a muzzle device on a rifle.
  • Captured design ensures that even if your comp comes loose it will not come off or impede function.
  • BARREL NOT INCLUDED
  • Made in the USA

1 x Shim Kit

  • 4 x 0.010″ Shim
  • 2 x 0.005″ Shim
  • 1 x 0.002″ Shim
  • 1 x 0.05mL Vial Loctite 272

Muschi Mounting Block Optional

 

*If ordering a 13.5×1 LH Metric compensator or a compensator for X-Carry Legion, your shim kit will include a PMM Metric Shim Alignment Rod. These are necessary for installing.*

 

1/2 x 28 Installation Video For PMM Faxon and SiCo Comps

Installation Video For PMM X-Carry Legion Comp

Installation Video for PMM Metric Comp

Additional information

Weight N/A
Finish

BLACK, FDE

Thread Pitch

1/2×28 compact Faxon, 1/2×28 Silencerco Compact & Full Size, 13.5X1 LH, X-Carry Legion

67 reviews for PMM Sig Sauer P320 Gen 1 Duty Comp for Threaded Barrels

  1. Bob S.

    Compensator worked great on my P320 C using standard 115 gr ball ammo. Highly recommend!

  2. Brice M.

    I was able to take it out today and put 300 rods through it. Worked as expected. Follow up shots were on target because of less muzzle flip. Could not be more impressed by the quality!

  3. Paul M.

    Nice item. Took a bit to find the right combination of shims, but that half the fun of it. Of course the item works and that is the best part. Highly recommend it.

  4. Jeffrey T.

    Haven’t shot it yet but this comp Looks good! Matches the contours of the slide perfectly. Customer service was great.

  5. Steven H.

    I absolutely love it Is made Re acquiring of the target So much smoother and faster I just waste that when I purchased it they have a black one in stock Other than that I am completely happy and satisfied and have referred Parker mountain the Sherry to a lot of my coworkers I am in The department of corrections

Add a review

Your email address will not be published. Required fields are marked *

Best Sellers:

Products we support