PMM Duty Compensator for PSA Dagger
$75.00
Product Details
Included:
1x PMM Dagger Compensator
- 7075 Aluminum finished in a type 3 class 2 Black or FDE hardcoat anodize
- 1/2 x 28 thread pitch designed around the PSA Dagger threaded barrel (9×19 marking on side of barrel, see below)
- No set screws, mounts like a muzzle device on a rifle.
- Captured design ensures that even if your comp comes loose it will not come off or impede function
1 x Shim Kit:
- 4 x 0.010″ Shim
- 2 x 0.005″ Shim
- 1 x 0.002″ Shim
- 1 x 0.05mL Vial Loctite 272
Optional Muschi Mounting Block
Barrel Fitment:
There were several variants of barrels sold with the PSA Dagger. These comps are designed around the current 4.5″ threaded barrel offering by PSA. The engraving should be on the ejection port side, showing 9×19.
We cannot guarantee fitment on barrels that are marked differently.
Non Compatible:
- Carry Cut (not Extreme, OG Carry Cut slides)
- SWR Slides
- Micro Dagger
- Sabre
Recoil Reduction:
All of our compensators are tested in a ransom rest and measured with a digital inclinometer.
The PMM comp for the Dagger was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
Ammo Recommendations:
115gr:
Federal American Eagle
Speer Lawman
Wolf
Remington UMC
Sig Sauer
Fiocchi
Magtech
124gr:
Blazer
Speer Lawman
Federal American Eagle
Sig Sauer
Winchester
PMC
Remington UMC
147gr:
Most ammo will run, but you will see less performance due to a lack of velocity
Ammo to stay away from:
Blazer 115
Winchester White Box 115
Armscor 115
PMC 115
All reloads or reman ammo
PMM Disclaimer:
PMM reserves the right to make esthetical design changes. While we try to accurately represent our current product offerings’ designs, there may be some esthetical variation from the product posted on this page and the product you receive.
Barrel and slide not included in this product. These photos are only shown for fitment.
Additional information
| Finish | Black, FDE |
|---|
11 reviews for PMM Duty Compensator for PSA Dagger
Best Sellers:
-
$8.00 Select options This product has multiple variants. The options may be chosen on the product page -
$360.00 Select options This product has multiple variants. The options may be chosen on the product page -
$100.00 Select options This product has multiple variants. The options may be chosen on the product page -
$10.00 – $12.00 Select options This product has multiple variants. The options may be chosen on the product page
Products we support
jhillard32 (verified owner) –
These comps match the lines of SOME dagger slides perfectly, others it’s less than ideal. On slides that have the slightly angled cut on the nose end, this matches perfect. On slides where the line is vertical, it looks slightly off. For an “angle cut” slide, the PMM fits the slide great. It looks like it was designed for the standard slide without windows or lightening cuts, but will still work on the others.
Barrel gap. PMM specifically states this will be present depending on your barrel. These are the measurements you’ll want to determine the gap for your barrel. 1/16” from the face of the slide to the shoulder of the threads will be ZERO gap, and anything above that will produce a gap equal to the difference.
Example: barrel measures 3/16” to shoulder, so 3/16” (actual) – 1/16” (ideal) = 1/8” gap
I am going to machine the barrel to get it gapped ideally, but if you do not have this capability, either be happy with the gap, find a barrel that’s the right dimension, or don’t buy the comp.
P.S. it looks like the comp will not properly fit on an SWR slide. The front of the slide is shaped differently and will not allow the comp to fit the slide tightly.
Leslie Ferrer (verified owner) –
PMM did what PSA couldn’t. Dagger comp is flawless. There is a bit of a gap, but that’s because PSA can’t measure barrels consistently. 10/10
john (verified owner) –
This comp works. I ran 115 fmj, 124 fmj, 124 hp. and 147 hp on a stock recoil spring and it performed flawlessly. Highly recommend.
JOSHUA (verified owner) –
Unfortunately, I missed out on a FDE comp to match my Dagger, but I snagged a black one before they were discontinued. There’s a bit of a gap, not PMM’s fault, but the installation method for PMM comps is a bit challenging, and difficult to time. The comp itself is decent, but I think that a set screw system would be easier. This is the only comp that matches the Dagger slide, but when I get a comp for my G19X, I think I will go with the Radian Ramjet.
Suly (verified owner) –
Please being these back!!!!!!! I love mine. I want more…