PMM SCAR Stainless Steel Gas Jets
$8.00
Product Details
PMM does a lot of SCAR barrel work. In doing so we replace the factory gas jet with our stainless steel version.
Includes 1x PMM stainless steel gas jet
- Utilizes a 2.5 MM allen wrench for installation and removal
- Available in a variety of sizes, 1.20mm – 2.00mm
- For sizes smaller than 1.2mm, check out J. Bennett Designs
FACTORY SCAR 16
- 16″: 1.35 MM
- 14″: 1.45 MM
- 10″: 2.00 MM
FACTORY SCAR 17
- 16″: 1.45 MM
- 13″: 1.60 MM
FACTORY MK20
- 20″ 7.62: 1.40 MM
- 20″ 6.5 Creedmoor: 1.20 MM
PMM does not guarantee or make suggestions on what gas jet size you will need to tune your SCAR. The above is offered for informational purposes only.
NO RETURNS OR EXCHANGES ON GAS JETS
PMM Tutorial on how to use the PMM FN SCAR® Gas jet tool.
PMM Tutorial on Removing the FN SCAR® Factory Gas jet.
Additional information
| Weight | N/A |
|---|---|
| Size of Gas Jet | 1.20mm, 1.25mm, 1.30mm, 1.35mm, 1.40mm, 1.45mm, 1.50mm, 1.55mm, 1.60mm, 1.65mm, 1.70mm, 1.75mm, 1.80mm, 1.85mm, 1.90mm, 1.95mm, 2.0mm |
50 reviews for PMM SCAR Stainless Steel Gas Jets
Best Sellers:
-
$8.00 This product has multiple variants. The options may be chosen on the product page
-
Original price was: $360.00.$300.00Current price is: $300.00. This product has multiple variants. The options may be chosen on the product page
-
Price range: $10.00 through $12.00 This product has multiple variants. The options may be chosen on the product page -
$100.00 This product has multiple variants. The options may be chosen on the product page
Products we support
Brandon G. –
I ordered two of the custom size gas jets based on a friends recommendation to get them. I had followed PMM on IG for awhile, and they seemed like a reputable company. Now, being someone that works in the firearms industry, and the fact I was ordering something ‘custom’, I expected to wait several weeks for this order to arrive and was ok with that. This was not the case. PMM had my order to me within a week with good emails on tracking and order fulfillment. 10/10 would do business with PMM again, they’re a breath of fresh air in the firearms industry from hat I’ve seen.
Quality of the gas jets seem top notch, I have not had a chance to install them as the stock FN gas jet is stuck in place and only uses a slotted screwdriver to remove. PMM was smart enough to mill their gas jets so that they can be installed/removed with a provided Allen wrench. Glad I won’t have a problem with swapping their parts out if I want too.
CHARLES V. –
These threaded gas port jets are a great replacement for the OEM jets. Using the same 2.5mm wrench that is use for nearly every screw on the upper receiver, the gas jet can be quickly removed for cleaning or for tuning the gas for your particular ammunition and preferred amount of felt recoil. The OEM screw requires a small flattip screwdriver which can sometimes be problematic when removing a stuck gas jet. The 2.5mm wrench is much easier to use and there is less likelihood of failure if the screw requires more than light torque to remove. I’m very pleased with these gas jets and I have several port sizes to tune the actions on both my SCAR 17 and 16. You won’t be sorry that you switched the OEM gas port jet for these.
Nik N. –
Fantastic! Every Scar owner should upgrade to the Stainless Steel Gas jets!
Dennis Y. –
Excellent quality and fit. I ordered a 1.4 and 1.3. I ended up using the 1.3 jet in my SCAR 17. Works well with all ammunition
Dennis Y. –
Excellent quality and fit. I ended up using a 1.3 jet in my SCAR 17. Works well with all ammunition