PMM Compensator for Staccato

The PMM Compensator uses a proprietary mounting system much like what is found on all modern rifles utilizing a combination of shims and proper timing of the compensator in relation to the pistol slide.

PMM compensators utilize a single port design at the 12 O’clock position which maximizes the effectiveness of the comp in keeping the muzzle of the pistol down and allows the slide to “track” faster and more accurately for follow up shots.

During testing the PMM compensators were designed to work with most factory loaded ammunition but will yield the best function of the pistol with a +P or Nato spec cartridge. We have adapted our designs to integrate with and complement the design of your pistol so no longer does a compensator have to look like an afterthought slapped on the end of your pistol, rather it delivers unmatched performance and looks.

Includes:

1x PMM 9mm Staccato Comp

• 7075 Aluminum finished in a type 3 class 2 Black hardcoat anodize.
• No set screws, mounts like a muzzle device on a rifle.
• Captured design ensures that even if your comp comes loose it will not come off or impede function.
• Designed around the Staccato factory threaded barrel for P, C2, or C.

1x Shim Kit

• 4 x 0.010″ Shim
• 2 x 0.005″ Shim
• 1 x 0.002″ Shim
• 1 x 0.05mL Vial Loctite 272

Optional Muschi Mounting Block (recommended)

Compatability:

• All comps: designed around Staccato OEM components. The P & C2 comps are designed to fit 2021 + newer Staccato pistols.
• C comp: designed around the 2024 C. Is not compatible with the CS unless you change out your recoil system to the DPM guide rod.

PSA: You must remove the o-ring from your barrel prior to comp installation