PMM Compensator for Walther PDP
$100.00
In stock
Product Details
Includes:
1x PMM Duty Comp for Walther PDP
- 7075 Aluminum finished in type III class 2 hard coat anodize in black
- No set screws, mounts like a muzzle device on a rifle.
- Adds approximately 1″ to over all length
- Designed around factory Walther PDP 1/2 x 28 threaded barrel
1 x Shim Kit
- 4 x 0.010″ Shim
- 2 x 0.005″ Shim
- 1 x 0.002″ Shim
- 1 x 0.05mL Vial Loctite 272
Optional Muschi Mounting Block
Compatibility:
- PDP & PDP F compatible with the Factory Walther PDP 1/2 x 28 threaded barrel or Jarvis PDP 1/2 x 28 threaded barrel
- PDP Steel Frame compatible with PMM 1/2 x 28 Threaded Barrel for Walther PDP Steel Frame
NOT COMPATIBLE with:
- Non-PDP Series Pistols
Recoil Reduction:
All of our compensators are tested in a ransom rest and measured with a digital inclinometer.
The PMM PDP comp was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
Ammo Recommendations:
115gr:
Federal American Eagle
Speer Lawman
Wolf
Remington UMC
Sig Sauer
Fiocchi
Magtech
124gr:
Blazer
Speer Lawman
Federal American Eagle
Sig Sauer
Winchester
PMC
Remington UMC
147gr:
Most ammo will run, but you will see less performance due to a lack of velocity
Ammo to stay away from:
Blazer 115
Winchester White Box 115
Armscor 115
PMC 115
All reloads or reman ammo
Additional information
| Weight | 0.5 lbs |
|---|---|
| Finish | Black, BLEM Black |
| Compatible Models |
26 reviews for PMM Compensator for Walther PDP
Best Sellers:
-
$8.00 This product has multiple variants. The options may be chosen on the product page -
Original price was: $360.00.$300.00Current price is: $300.00. This product has multiple variants. The options may be chosen on the product page
-
Price range: $10.00 through $12.00 This product has multiple variants. The options may be chosen on the product page -
$100.00 This product has multiple variants. The options may be chosen on the product page
Products we support
Dave Mathews (verified owner) –
First comp on a pistol and I’m very impressed. This in conjunction with a stainless guide rod and 11lb spring took my PDP Pro to the next level. Muzzle flip is almost nonexistent with a tight grip, I have even less movement when tracking the dot and it looks amazing, the lines match up perfectly, great attention to detail on this, well worth the price. I got the mushi mounting block and that helped the already simple install, it took me 10-15 minutes right after it came in then I hit the range and put 200 rounds through it with no malfunctions! I’ll definitely be getting their micro comp and barrel combo for the gen 3 Glock 17 when/if it releases.
Keng887 (verified owner) –
Nice compensator good quality
Doug (verified owner) –
So far so good. Better than Harrington imho!
Juan Martinez (verified owner) –
Very nicely manufactured piece. Love the look. Haven’t had time to spot it yet but will soon.
My experience with installation was not as straightforward. I needed to stack almost all the shims to get the comp to snug up about an 1/8th of a turn from vertical. It may be the thread cut on the barrel being slightly longer grip length but I was a bit concerned.
Ultimately, the comp snugged down with just an atom’s breadth of touching the slide on the right and left edges. Just enough to nick the black coating on each side.
My only regret is having not gotten the installation tool. I not see how that would be handy.
John M. (verified owner) –
Blends into the gun really well. Shooting wise, it reduced felt recoil by alot and I am able to get on target faster. Worked right out of the box on a factory PDP pro fullsize with stock recoil assembly. I had 2 failures. 1, could have been bad ammo, 2 was probably due to limp wrist, but functioned flawlessly after putting 100 rds down range. Would recommend