PMM Compensator for Walther PDP
$100.00
In stock
Product Details
Includes:
1x PMM Duty Comp for Walther PDP
- 7075 Aluminum finished in type III class 2 hard coat anodize in black
- No set screws, mounts like a muzzle device on a rifle.
- Adds approximately 1″ to over all length
- Designed around factory Walther PDP 1/2 x 28 threaded barrel
1 x Shim Kit
- 4 x 0.010″ Shim
- 2 x 0.005″ Shim
- 1 x 0.002″ Shim
- 1 x 0.05mL Vial Loctite 272
Optional Muschi Mounting Block
Compatibility:
- PDP & PDP F compatible with the Factory Walther PDP 1/2 x 28 threaded barrel or Jarvis PDP 1/2 x 28 threaded barrel
- PDP Steel Frame compatible with PMM 1/2 x 28 Threaded Barrel for Walther PDP Steel Frame
NOT COMPATIBLE with:
- Non-PDP Series Pistols
Recoil Reduction:
All of our compensators are tested in a ransom rest and measured with a digital inclinometer.
The PMM PDP comp was designed to work with most factory loaded ammunition and yield 30-35% reduction in muzzle climb (with 115gr UMC)
Ammo Recommendations:
115gr:
Federal American Eagle
Speer Lawman
Wolf
Remington UMC
Sig Sauer
Fiocchi
Magtech
124gr:
Blazer
Speer Lawman
Federal American Eagle
Sig Sauer
Winchester
PMC
Remington UMC
147gr:
Most ammo will run, but you will see less performance due to a lack of velocity
Ammo to stay away from:
Blazer 115
Winchester White Box 115
Armscor 115
PMC 115
All reloads or reman ammo
Additional information
| Weight | 0.5 lbs |
|---|---|
| Finish | Black, BLEM Black |
| Compatible Models |
26 reviews for PMM Compensator for Walther PDP
Best Sellers:
-
$8.00 This product has multiple variants. The options may be chosen on the product page -
Original price was: $360.00.$300.00Current price is: $300.00. This product has multiple variants. The options may be chosen on the product page
-
Price range: $10.00 through $12.00 This product has multiple variants. The options may be chosen on the product page -
$100.00 This product has multiple variants. The options may be chosen on the product page
Products we support
Ben (verified owner) –
If you are in the fence get this!!! I was thinking about adding this comp for a year and wish I had soon, what an upgrade. The craftsmanship, finish and total package made installation easy and a great looking addition to my PDP. This comp took my PDP to the next level!
David F. (verified owner) –
Absolutely THE BEST accessory I’ve put on my PDP Pro Compact!!! It’s taken a gun that’s VERY well known & notorious for being snappy & turned it into a gun that shoots so flat, I seriously had to get used to it. Obviously, it didn’t take more than 1 magazine of 124 through it to do so. Also, at least on the Pro Compact, it doesn’t add so much length that it makes the gun unwieldy for EDC purposes, as well as not affecting holster fit, both of which were CRUCIAL factors for me. WELL DONE, PMM! I look forward to buying your comp for my Glock very soon! You have a dedicated customer now!
Steven Keawe (verified owner) –
I love these compensators. I have 3 for all my Walther PDPʻs. They work great, and they look beautiful on the end of the slide. Often companies make compensators that look ok but never seem to integrate with the lines of the slide. These comps follow the lines of the PDP slide so well and looks like an extension of the slide. Its as if Walther designed the comps from the factory. Anyways, these comps are flat out THE BEST. Thanks PMM for a kick a$$ comp.
tiner.erik (verified owner) –
Put this on my full size PDP pro and have been able to take it to the range with several different ammos and has preformed flawlessly just as every other product I have received from PMM. Can’t recommend this company enough.
Pete Marone –
Put this on my PDP Pro Compact SD with the Walther tungsten heavy guide rod. Could instantly feel/see the effect of the compensator with my EDC carry ammo, alternate EDC carry ammo (Barnes TAC-XPD and Defiant TCX +P 115gr) and 119gr Norma FMJ. No cycling issues so far after a couple hundred rounds. Highly recommended!